Clone-A-Willy Kit

Got a favorite dildo or masturbator? Love to work your cock with a pump, a set of sounds or electrical stimulator? As men we love our tools and our toys - share your pictures, videos and stories about the sextoys - home-made or store-bought - that help you to get off.

Moderators: blacksunshineaz, Ziggurat

User avatar
Ziggurat
Posts: 1302
Joined: Thu Aug 18, 2005 7:22 pm
Location: Niagara Ontario Canada
Contact:

Clone-A-Willy Kit

Post by Ziggurat »

Here's a review of one of those Clone-A-Willy Kits that were manufactured by Empire Labs in the USA a couple years back. I made this video last year, so bear with me whilst I remember what happened...

Now these things are retarded expensive for what you get. I think I paid $69.95 or higher, I know it wasn't lower. Got this at a pretty large sex store in Toronto. Prolly the largest one as it had a couple floors. They used to have a RealDoll on display too, but it got mangled apparently. The plastic tube that its packaged in is actualy part of the tools you'll need to use it. So all in all you get the plastic tube (container). The molding powder that you need to make the molding of your cock. A really cheap thermometer, but it did the job, so what the hay. The two part liquid rubber compound that you have to mix thoroughly, and is particularly stinky. A stirring stick. And a cheap 5" vibrator that was surprising powerful, but could prolly be bought separately for $4.99....

Inside the tube, you pull out the liner note with the rather plain front side not showing any details, and the 7 step instructions that are actually well written and easy to follow on the back side. Mine also had a cut out coupon for the DVDs from Adam & Eve. However, there is also a note for if you need refills on the liquid rubber or the molding powder, you have to order from www.cawreorder.com which I'll tell you in advance is a dead link. Or was when I first used this little fun kit. Knowing what I now know. I can replicate this entire kit for a fraction of the cost with materials that are a little more advanced, and safer. However, as I used Plaster-of-Paris and Platinum Silicone, my substitution project took alot longer to finish. The CAW kit is litterally finished in 24 hours.

So, if you find one of these, my suggestion is if you want some fun, buy it, but dont pay full price as the company no longer exists and the item is prolly more than a few years old. However, everything inside was well sealed and should still be usable. While I still have the actual replica I made of myself from the original kit, I only keep it for display. It's been a year and the rubber phallus still stinks. Hence why I switched to silicone.
Do it with pride or don't bother doing it!
https://xhamster.com/users/thetoweringziggurat
My Patreon tip jar:
patreon.com/TheToweringZiggurat

User avatar
Ziggurat
Posts: 1302
Joined: Thu Aug 18, 2005 7:22 pm
Location: Niagara Ontario Canada
Contact:

Clone-A-Willy pics

Post by Ziggurat »

IMG00443.jpg
IMG00444.jpg
IMG00445.jpg
Prepumping before selfcasting
Prepumping before selfcasting
Final product
Final product
VIDEOS TO FOLLOW SOON!
Do it with pride or don't bother doing it!
https://xhamster.com/users/thetoweringziggurat
My Patreon tip jar:
patreon.com/TheToweringZiggurat

User avatar
aleingang69
Posts: 2327
Joined: Tue Jan 24, 2006 9:53 pm

Re: Clone-A-Willy Kit

Post by aleingang69 »

Wow - I had no idea they ended up that realistic-looking.
Do you ever look at it and have a flash of amputation anxiety? ;)
And it's a vibrator!

Looks like the Toy Store has a bunch of different kinds of these:

http://toys.solosuck.com/sphinx_search. ... ly&cid=all

and here's a different brand:

http://toys.solosuck.com/prod_info.php? ... N-si-60050

Thanks Zig!

User avatar
Ziggurat
Posts: 1302
Joined: Thu Aug 18, 2005 7:22 pm
Location: Niagara Ontario Canada
Contact:

Re: Clone-A-Willy Kit

Post by Ziggurat »

lol, no.. never had any sort of feeling like that Al. However, I have sucked the thing and fucked it now on a few occasions. :) Still having problems with the demo video.. I'm actually hoping to have it up here later today. :) Will have to take another video of the replica in action as well.
Do it with pride or don't bother doing it!
https://xhamster.com/users/thetoweringziggurat
My Patreon tip jar:
patreon.com/TheToweringZiggurat

User avatar
aleingang69
Posts: 2327
Joined: Tue Jan 24, 2006 9:53 pm

Re: Clone-A-Willy Kit

Post by aleingang69 »

Hmmmm - interesting - so I could suck myself and (sort of) fuck myself at the same time. Double fun!

User avatar
Ziggurat
Posts: 1302
Joined: Thu Aug 18, 2005 7:22 pm
Location: Niagara Ontario Canada
Contact:

Re: Clone-A-Willy Kit

Post by Ziggurat »

hell, I wanna make like 8 of these... have a self orgy!
Do it with pride or don't bother doing it!
https://xhamster.com/users/thetoweringziggurat
My Patreon tip jar:
patreon.com/TheToweringZiggurat

User avatar
Ziggurat
Posts: 1302
Joined: Thu Aug 18, 2005 7:22 pm
Location: Niagara Ontario Canada
Contact:

Re: Clone-A-Willy Kit clips

Post by Ziggurat »

Finally found a splitter for this damn movie... Sorry for the dalay...

(Videos and/or links removed for personal/professional reasons. Sorry for the inconvenience.)
Do it with pride or don't bother doing it!
https://xhamster.com/users/thetoweringziggurat
My Patreon tip jar:
patreon.com/TheToweringZiggurat

User avatar
aleingang69
Posts: 2327
Joined: Tue Jan 24, 2006 9:53 pm

Re: Clone-A-Willy Kit

Post by aleingang69 »

Thanks buddy - excellent videos!
I've always wondered if my dick would stay hard long enough to make a good impression (ha ha), but it didn't seem to be a problem for you?

The level of detail on the finished product is amazing - really beautiful.

User avatar
Ziggurat
Posts: 1302
Joined: Thu Aug 18, 2005 7:22 pm
Location: Niagara Ontario Canada
Contact:

Re: Clone-A-Willy Kit

Post by Ziggurat »

Oddly enough.. I did have some erectile issues. I'm actually a little longer than that toy. The molding material was a little cold, and I prolly shoulda used a cock ring instead of my penis pump first. Just the ring woulda been perfect I think. I'ma make a new one soon enuff. :D
Do it with pride or don't bother doing it!
https://xhamster.com/users/thetoweringziggurat
My Patreon tip jar:
patreon.com/TheToweringZiggurat

User avatar
LoveThyself
Posts: 72
Joined: Fri Feb 11, 2005 9:29 pm
Location: Far side of the Moon

Re: Clone-A-Willy Kit

Post by LoveThyself »

I got this over the summer. Of course the difficult thing is that you have an exact time that you need to stick your cock in it, and before that it's all mixing and getting temperatures right. Even with a few of my really favorite porns I still wasn't able to keep hard for the proper time.
I had to reorder the molding powder. The second time I was mostly hard, but not quite. And you know the difference, I wanted a FULLY hard version of my cock, so I could choke on it and feel the fullness of it. I am overall satisfied, but not entirely. The material tastes funny when you are sucking on it, and it is a little strange. Overall I love the idea, and I need to try another one, I mean it never hurts to have more than one!

User avatar
Ziggurat
Posts: 1302
Joined: Thu Aug 18, 2005 7:22 pm
Location: Niagara Ontario Canada
Contact:

Re: Clone-A-Willy Kit

Post by Ziggurat »

When I tried to reorder the mold material I kept getting "bad link" results. Will have to try again. I'm switching the actual dildo material to platinum grade silicone, which is odourless and tasteless. You are fully right with the clone a willy materials scent/taste. It is definately um.. off. You can get two half pints of the two part silicone solution for about $30. The next time I do this, I will try to take video and pictures again. And show the differences in my attempt. I may even switch the molding material for regular plaster of paris which will give me more time to keep it up. My wife suggests doing it first thing in the morning when I still have my morning hard-on which is usually bigger than I normally am too. :) However, I can just imagine that putting myself into the wet mold material will make me have to pee even more than I do when I wake up... Decisions.. decisions... work, work, work... :D
Do it with pride or don't bother doing it!
https://xhamster.com/users/thetoweringziggurat
My Patreon tip jar:
patreon.com/TheToweringZiggurat

User avatar
Strocker
Posts: 18
Joined: Fri Jan 28, 2005 7:41 am

Re: Clone-A-Willy Kit

Post by Strocker »

I made a Clone of my penis about two years ago. It came out of curiosity, I always wondered what I would feel like if I was penetrated by my own. I also wondered how big it would look all by its own if not attached to me and if I could look at it fomr angles naturally not possible. So I searched the net and found the Clone a Willy kit.

Took me a couple of attempts before I got the one I imagined and had mastered the difficulties of doing the cast. You see those kits are made for nice textbook penises, no curvature or just a little. Well mine is curved. For the first version I did not alter the molding tube and the glans touched the tubes wall leaving an apparent impression on the clone. Also because of my dick curvature i could not insert it all the way in without touching the tube even more, resulting in a clone that was about half the my real size. Couple of pictures of the first one:
clone1 (0).JPG
clone1 (1).JPG
clone1 (2).JPG

It was a nice one, but I was not happy with it because half of it wasn't there.

So I tried again, this time cutting the molding tube so it was angled matching my dick curvature. With this alteration I managed to get almost the entire length of my penis. It was a very good impression of my penis, but I did not like the vibrato so I made a second version of the same mould without the vibrato and that was exactly what I had hoped for. It's kind of hot to place it somewhere and look at it standing there all by itself. Some pictures of the final clone penis:
clone2 (0).JPG
clone2 (1).JPG
clone2 (2).JPG
I also made a little "how to clone your penis" video for Xtube, which I think was linked to at some time at these message boards.
click "here" to get to the "how to" video at xtube. It also shows per video how I takt the final clone out of the moulding tube.
Attachments
strokerClone.flv
(8.37 MiB) Downloaded 13314 times

User avatar
aleingang69
Posts: 2327
Joined: Tue Jan 24, 2006 9:53 pm

Re: Clone-A-Willy Kit

Post by aleingang69 »

Thanks Strocker - I had wondered how the kits would work with a foreskin in different positions (and how I envy you that long skin,man!)
Beautiful results - must be really fun top play with. I'm adding your how-to clip from xtube to you message so the guys don't have to go over there to watch it - if you don't want it on here you can just delete it.

Thanks for sharing!
AL

User avatar
Strocker
Posts: 18
Joined: Fri Jan 28, 2005 7:41 am

Re: Clone-A-Willy Kit

Post by Strocker »

Well thx. Yeah the foreskin is a bit of a problem. I originally had planned to create a clone with the foreskin covering the glans, I've got enough of it even when hard. But once I slid my penis in to the molding liquid it retracted by itself and out came the first clone version. I'll add two more pictures, one showing how much length was missing on the first clone, the other showing the first and second (vibrato version) next to the original. And nope, I do not have these two anymore. I only kept the final one, the others were prototypes.
missing lenght.JPG
MkI vs MkII vs original (1).JPG
What really baffled me was when I took the second clone out the tube. Firs thought is "WOW ... that's me!" Second thought is "It's ... BIG. Bigger than I had thought!". At first I could not put it out of my hands. I was looking at it from all angles and was very surprised how accurately the mould recreated the skin texture and other surface detail. Amazing. Would be fun to hear what other "cloners" thought when they took "it" out of the tube.

I still have a clip when I used the first clone on me for the first time, I'll add to this post if someone wants to see it.
clone1 fuck.wmv
(1005.36 KiB) Downloaded 13299 times
It was very surprising how "big" it felt, not in length since it only represented half of "me", but in thickness. I had not expected that. And it gave me hell of a hard on. It was a fantasy come true. It was even hotter when I used it and did a selfsuck at the same time. No video of this since I only got two hands. But it's also hot to cum on to the clone and lick it off, that is the only way for me to get my penis in to my mouth past the glans.
IMG_0030.JPG
Only down side to the clone thing is, the clone is very hard "hard on". Its not inflexible, but much sturdier then your own hard on. When you play with the clone you are like "well my hard on isn't that hard is it?" and you almost think you have erectile dysfunction somehow, because the clone is the exact duplicate of you but much harder. It's kind of strange.

User avatar
aleingang69
Posts: 2327
Joined: Tue Jan 24, 2006 9:53 pm

Re: Clone-A-Willy Kit

Post by aleingang69 »

Beautiful, man! Thanks!

Post Reply